Drive-Wheels - Agria 3900 Operating Instructions Manual

3. Devices and Operating Elements

Drive-Wheels 5.0 - 10

Drive-Wheels 5.00 - 12
5
1
1 Wheel flange
2 Wheel adapter flange
3 Washer
4 Wheel nut
5 Hexagonal bolt
6 Drive-wheel
7 Washer
8 Wheel nut
Wheel Weight 12"
2 3 4
6 7 8
agria Two-Wheel Tractor 3900
Drive-Wheels
Use wheel nuts (8) to mount the
appropriate drive-wheels (6) on the
wheel flanges (1).
Before, fit the wheel adapter flanges (2)
onto the drive-wheels.
Track width is adjustable to fit
requirements (see track width plan p18).
For this purpose, mount drive-wheels
onto wheel flanges or drive-wheels onto
wheel adapter flanges (flanges or
wheels turned inward or outward and
mounted on their inner or outer sides
onto wheel adapter flanges).
For full tractive power, mount wheels
with pointed parts of lugs showing in
driving direction (wheels seen from
above). This applies also when steering
handle is swivelled 180° f or front
attachments.
Wheel Fastening Bolts
On new machines and each time you
change wheels retighten wheel bolts
and wheel nuts at a torque of 50 Nm.
Otherwise tighten bolts and nuts each
time you maintain the machine.
Snow Chains
When working with snow chains fitted,
observe manufacturer's instructions.
Make sure there is sufficient clearance
between chains and machine parts.
3
31