Table of Contents
Advertisement
Quick Links
Operating
Operating
Operating
Operating
Operating
Instructions
Instructions
Instructions
Instructions
Instructions
Power Hoe
Power Hoe
Power Hoe
Power Hoe
Power Hoe
1000E
1000E
1000E
1000E
1000E
1000 611
5817A
Before commissioning the machine, read operating
instructions and observe warnings and safety instructions.
Operating Instructions No. 998 777-A 09.09
Advertisement
Table of Contents
Related Manuals for Agria 1000E
Summary of Contents for Agria 1000E
- Page 1 Instructions Instructions Instructions Instructions Power Hoe Power Hoe Power Hoe Power Hoe Power Hoe 1000E 1000E 1000E 1000E 1000E 1000 611 5817A Before commissioning the machine, read operating instructions and observe warnings and safety instructions. Operating Instructions No. 998 777-A 09.09...
-
Page 2: Scope Of Delivery
Hoeing drive Please state these data when order- ing spare parts to avoid wrong de- liveries. (max.) fast Only use original agria spare parts! Specifications, figures and dimen- (min.) slow sions stated in these instructions are not binding. No claims can be de- rived from them. -
Page 3: Designation Of Parts
Part Designations agria Power Hoe 1000E... - Page 4 12 R-clip on depth bar 13 Hoeing guard 14 Depth bar 15 Handle 16 Hoeing tools, right 17 Receiving hole for front wheel 18 Transmission oil fill/drain opening 19 Hoeing tools, left 20 Front wheel 21 Guard disc 22 Insulator agria Power Hoe 1000E...
-
Page 5: Table Of Contents
Turning direction switch ....13 Steering handle ......13 Electrical wiring .... 26 Hoeing tools ........14 Depth bar ........15 Conformity declaration . 27 Front wheel ........15 Ridging attachment ......16 Note folding-out page! Fig. A ......3 agria Power Hoe 1000E... -
Page 6: Unpacking And Assembly
Remove the machine from the box or cut it open in 4 corners to fold down the sides. Attach all hoeing tools and guards Attach depth bar Attach the front wheel Carry out the start-up procedu- agria Power Hoe 1000E... -
Page 7: Safety Instructions
Only persons familiar with the power enclosures to prevent damage to tools. hoe and instructed on the hazards of operation are allowed to use, maintain Only work at walking speed. and repair the power hoe. agria Power Hoe 1000E... - Page 8 During works on slopes, there is the risk of slipping of the operator and/or the power hoe. Make sure that you are safely standing when operating the agria Power Hoe 1000E...
-
Page 9: Electrical System
Implements / Hoeing Tools nance and cleaning. Only mount implements and hoeing Only use original agria spare parts. All tools with engine and implement drive other commercial spare parts must cor- shut off. respond to quality and technical re- Always use appropriate tools and wear quirements specified by agria. -
Page 10: Safety Instructions
1. Safety Instructions Explanation of Warning Signs In case of damage to the extension lead, immediately withdraw mains plug! Signs Do not use in rain! Wear protective gloves. Wear solid shoes. agria Power Hoe 1000E... -
Page 11: Specifications
........340 mm b ........570 mm c ......... 230 mm d ........500 mm e ........720 mm h ......approx.1000 mm l ........1450 mm A ........700 mm k ....>900mm at h=800mm agria Power Hoe 1000E... -
Page 12: Engine
3. Devices and Operating Elements The power hoe agria type Farmhandy 500E Cable take-ups (cable drums) as per is suited for soil cultivation in horticulture DIN VDE 0620 S for connecting power and park maintenance. hoes to the mains must be fitted with a... -
Page 13: Safety Circuit
(as shown in the figure); then swing it to the left or right. Release the pressure plate, slightly move the steering handle to the left and right until it locks into the toothing. agria Power Hoe 1000E... -
Page 14: Hoeing Tools
Secure them with the linch pin (2) which is inserted in the holes on hub Attach the hoeing tools to the shaft and shaft. using the hex head bolts (7) that go in the holes on the hubs and shaft. agria Power Hoe 1000E... -
Page 15: Depth Bar
Hoeing position: Pull the handle to unlock the bracket Pivot the bracket up and lock it. Travelling position: Correspondingly, pivot the bracket down and lock it. agria Power Hoe 1000E... -
Page 16: Ridging Attachment
R-clip (3). the clamping screw (6). Adjust the ridging body’s (7) tilt via the hex head bolt (5). Set the body (7) to the desired ridging depth, then tighten the hex head bolt (4). agria Power Hoe 1000E... -
Page 17: Commissioning And Operation
Protective covers mounted? Attachments attached correctly? 4.3 Attach the extension lead to the power hoe Assembly sequence Only now insert the mains plug of the extension lead into the mains electrical socket. agria Power Hoe 1000E... -
Page 18: Hoeing
Set switch (A/6) to " " Switching to forward movement: same procedure Changing of the direction is only possible during operation by renewed use of the safety switch! The motor cuts out automatically when over- loaded agria Power Hoe 1000E... -
Page 19: Handling Of The Extension Lead
Take the plug out of the mains socket. After unplugging briefly operate the safety circuit lever and the turning direction switch so that the capacitor discharges, short turning movements of the hoe tools are possible when carrying this out! agria Power Hoe 1000E... -
Page 20: Maintenance
To avoid accidentally starting the engine always remove the mains plug and discharge the capacitor while working on the machine or on the engine (Kap. 4.5). Adjustments on electronics should be carried out only by agria-Werke, otherwise the product liability and the warranty claim will render null and void! The power hoe will operate reliably at all times, if it receives proper servicing. -
Page 21: Safety Circtuit
Clean hoe tools after use and where necessary spray down with water. After each cleaning with a pressure washer grease steering handle pivot bearing and let power hoe run for a short time to press water out. agria Power Hoe 1000E... -
Page 22: Storage
- in humid rooms - in rooms where fertilizer is stored - in stables or adjacent rooms. Do not store the machine with the motor hanging down- wards! d) Covering the machine with cloth or a similar cover. agria Power Hoe 1000E... -
Page 23: Varnishes, Wear Parts
400 ml Wear parts: 009 16 O-ring for hoeing drive Ø16 x 22 x 2 711 65 Hoe blade, left 711 66 Hoe blade, right 711 65 711 66 Spare parts list: 997 007 Power hoe 1000 agria Power Hoe 1000E... -
Page 24: Troubleshooting
6. Troubleshooting Observe safety instructions! Have all serious malfunctions on the machine or engine repaired by your agria workshop. They have the proper tools. Improper repairs can only add to the damage. Problem Possible cause Possible solution Page Engine - Safety circuit lever not pushed... -
Page 25: Inspection And Maintenance Chart
Lubricate all gliding parts A = Each time before you take up operation B = After each cleaning K = Checks and maintenance to be executed by operator W = Maintenance to be executed by professional workshop agria Power Hoe 1000E... -
Page 26: Electrical Wiring
Electrical Wiring 1 Relay module / board blue 2 Frequency converter brown 3 Potentiometer yellow 4 Turning direction switch green 5 Safety shifting lever grey V = forward pink R = reverse rt/bl red/blue black white agria Power Hoe 1000E... -
Page 27: Conformity Declaration
Conformity Declaration agria Power Hoe 1000E... - Page 28 GmbH Bittelbronner Straße 42 D-74219 Möckmühl Tel. +49/ (0)6298 /39-0 Fax +49/ (0)6298/39-111 e-mail: info@agria.de Internet: www.agria.de Your local agria specialist dealer:...
Need help?
Do you have a question about the 1000E and is the answer not in the manual?
Questions and answers