Drive Wheels - Agria 100-R Operating Instructions Manual

3. Devices and Operating Elements
80 Nm
1 Wheel shaft
2 Hub tube on drive-wheel
3 Hex bolt
4 Star washer
1 Wheel shaft
2 Differential hub
3 Star washer
4 Hex bolt
5 Drive-wheel
6 Bevel spring washer
7 Wheel bolt
80 Nm
agria Multi-Purpose Power Hoe 100-R

Drive wheels

Drive-wheels 4.00-8 (rough tread
tyres
Used for ploughing and mowing
Fitting drive-wheels
Push the drive-wheel hub tube (2) onto
the wheel shaft (1).
Push the hex bolts (3) through the star
washers (4) and through the holes on the
hub tube and tighten them (torque 80 Nm)
Drive-wheels 4.00-8 rough tread
tyre
Drive-wheels 5.0-10 field tyre
each type is fitted with differential
hubs
The differential effect of the differential
hubs make steering and turning easier.
They are used for ploughing and mowing
Fitting the differential hubs
Push the differential hubs (2) on the
wheel shaft (1).
Push the hex bolts (4) through star
washers (3) and through the hole on the
hub tube and tighten them (torque 80 Nm)
Fit the drive-wheels (7) together with
the bevel spring washers (6) to the diffe-
rential hubs.
Removing differential hubs
To remove the hubs reverse the above
process.
For full tractive power, mount the wheels
with the pointed parts of lugs showing in
travelling direction (wheels seen from
above).
3
23