Advertisement
FT1000 ASSEMBLY INSTRUCTIONS
IMPORTANT NOTICES
Read all warning labels, the instruction placard and this manual before
attempting to use this machine. Always consult your physician and an
exercise professional before beginning any exercise program/regimen.
Before any test or use check for proper assembly of the machine including
(but not limited to): bolts and other hardware fastened properly, cables in
pulley grooves and routed correctly. For safety use only the top weight for
the first machine movement.
Maintain your machine in good working order by following the maintenance
schedule provided on the equipment.
It is strongly recommended that a qualified dealer assemble this
FT1000 Functional Trainer.
Should there be any question during assembly contact your authorized Inflight
Fitness dealer or call direct to 714 821 4177.
Before beginning assembly read this instruction manual thoroughly. Unpack and
verify all parts and hardware quantities against the parts and hardware lists.
Follow the assembly steps in sequence. Failure to follow the order of assembly
will result in disassembly later and possible damage to the machine components.
This manual includes the instructions for both the standard 2:1 cable pull
functional trainer and the optional 4:1 cable pull functional trainer.
The 3/8" nuts provided with this machine are "centerlocking". They provide a
more secure assembly than nylon locking nuts. Please note they do require
more force to tighten than nylon locking nuts.
1
Advertisement
