Programming Note; Service Mode Programming; Ram Clearing; Initial Clear - Sam4s ER-5100 Programming & Operating Manual

PROGRAMMING NOTE

This ECR ( Electronic Cash Register ) 's programming is easy.
In this manual, the programming steps are explained with flow chart boxes.
Each box represents a key on the keyboard.
The flow chart shows each key stroke you need to complete the programming.
Enter the keys in the flow chart from left to right.
DEFAULT PROGRAM : This machine arrives with a default or "generic" program already installed.

1 SERVICE MODE PROGRAMMING

Service mode programming is the initial programming that is required when the register is new "out-of-the-
box".
Service mode programming is also used to return the register to this condition.

1.1 RAM CLEARING

1.1.1 INITIAL CLEAR

Keyboard lock-ups and constant error conditions may be cleared by the following procedure.
This procedure will not effect register programming, or clear previously stored totals in RAM memory.
( 1 ) Turn the keylock to the 'P' position and press the "SUBTL" key.
( 2 ) While holding the "SUBTL" key down, power the register off, and back on.
Continue to hold the "SUBTL" key down until the receipt printer stops printing and the
display shows 0.00.
16
Program options are set to 0(zero), unless otherwise noted, which means
the machine is operational right out-of-the-box.
* INITIAL CLEAR *