Operating Note; Clerk Sign On; In Case Of 4 Clerks ( System Option 28'S Value 'C' = 0 ); Push Button Sign On - Sam4s ER-5100 Programming & Operating Manual

OPERATING NOTE

This section shows you how to operate the cash register during normal use.
The operating steps are explained with flow chart boxes.
Each box represents a key on the keyboard that you should press to complete an operation.
Unless the specified note, the flow charts use the "CASH/TEND" key to finalize the sale.
NOTE : A clerk must be signed on before operation takes place.
All registrations are made in the "REG" or "VOID" control lock position.

1 CLERK SIGN ON

1.1 IN CASE OF 4 CLERKS ( SYSTEM OPTION 28's VALUE 'C' = 0 )

1.1.1 PUSH BUTTON SIGN ON

CLERK
The clerk key ( 1, 2, 3 or 4 ) to start operation

1.1.2 SECRET CODE SIGN ON

To use this sign on method, SYSTEM OPTION ADDRESS 28 must be set to value 'b'.
CLERK
The clerk key ( 1, 2, 3 or 4 ) to start operation

1.2 IN CASE OF 15 CLERKS ( SYSTEM OPTION 28's VALUE 'C' = 4 )

1.2.1 PUSH BUTTON SIGN ON
( X X )
CLERK NO. ( 1 ~ 15 )
44
The code will not be shown.
( 6 digits secret code )
CLERK 4
CLERK