Joining The Wing Halves - Phoenix Model CANARY Instruction Manual

Instruction Manual
1

Joining the wing halves.

Joining the wing halves.
1
Draw a center line.
3
Glue the wing joiner to the wing.
5
Glue the wing by epoxy.
2 Installing the aileron servo and linkage.
7
Remove the covering.
Center line
2
Remove the covering.
4
Apply the epoxy into the wing section.
6
Apply the trim tape to the center section of the wing where
they join.
8
Glue the two hard wood by C.A glue.
1
Canary