Joining The Wing Halves - Phoenix Model MUSTANG P51 - EP Instruction Manual

23
Install the landing gear.
4

Joining the wing halves.

Joining the wing halves.
25
Draw a center line.
27
Glue the wing joiner to the wing, using the epoxy glue.
29
Glue the wing by epoxy.
Center line
24
Secure the landing gear.
26
Remove the covering from the rear of the wing.
28
Apply the epoxy into the wing section.
30
Apply the trim tape to the center section on the top and the
bottom of the wing where they join.
5