Diamond DA 40 Flight Manual page 243

DA 40 AFM
7.8 CANOPY, REAR DOOR, AND CABIN INTERIOR
Front Canopy
The front canopy is closed by pulling down on the canopy frame, following which it is locked
by means of a handle on the left hand side of the frame. On locking, steel bolts lock into
mating holes in polyethylene blocks.
"Cooling gap" position: A second setting allows the bolts to lock in, leaving a gap under
the front canopy.
The front canopy can be blocked by a locking device (optional) on the left side near the
canopy opening lever by turning the key clockwise. The closed and blocked canopy can
be opened from inside by pulling the lever inside the opening handle.
The airplane may be operated with the front canopy in the
"cooling gap" position on the ground only. Before take-off the
front canopy must be completely closed and locked, but not
blocked with the locking device.
A window on the left hand side of the canopy can be opened for additional ventilation or
as an emergency window. Some serial numbers have another window on the right hand
side of the canopy.
Doc. # 6.01.01-E
WARNING
Rev. 8 01-Dec-2010
Airplane
Description
Page 7 - 17