Adjusting The Front Wheel Static Balance - Yamaha XT660R 2004 Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk
FRONT WHEEL AND BRAKE DISC
4 - 8
2. Tighten:
• wheel axle 1
59 Nm (5.9 m · kg, 43 ft · lb)
• wheel axle pinch bolts 2
18 Nm (1.8 m · kg, 13 ft · lb)
CAUTION:
_
Before tightening the wheel axle nut, push
down hard on the handlebar several times
and check if the front fork rebounds
smoothly.
NOTE:
To tighten the wheel axle pinch bolt, tighten
the outer and inner bolts to the specified
torque, and then tighten the outer bolt to the
specified torque again.
3. Install:
• brake caliper bolts
40 Nm (4.0 m · kg, 29 ft · lb)
WARNING
_
Make sure the brake hose is routed prop-
erly.
EAS00548
ADJUSTING THE FRONT WHEEL STATIC
BALANCE
NOTE:
_
• After replacing the tire, wheel or both, the
front wheel static
adjusted.
• Adjust the front wheel static balance with the
brake disc installed.
1. Remove:
• balancing weight(s)
CHAS
balance should be