Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
INTRODUCTION/PERIODIC MAINTENANCE AND
EAS00036
PERIODIC CHECKS AND ADJUSTMENTS
INTRODUCTION
This chapter includes all information necessary to perform recommended checks and adjustments.
If followed, these preventive maintenance procedures will ensure more reliable vehicle operation, a
longer service life and reduce the need for costly overhaul work. This information applies to vehicles
already in service as well as to new vehicles that are being prepared for sale. All service technicians
should be familiar with this entire chapter.
EAS00037
PERIODIC MAINTENANCE AND LUBRICATION CHART
NOTE:
• The annual checks must be performed every year, except if a kilometer-based maintenance
is performed instead.
• From 50,000 km, repeat the maintenance intervals starting from 10,000 km.
• Items marked with an asterisk should be performed by a Yamaha dealer as they require special
tools, data and technical skills.
No.
ITEM
Fuel line
1 *
(See page 3-29)
Spark plug
2
(See page 3-19)
Valves
3 *
(See page 3-13)
Air filter element
4
(See page 3-28)
Clutch
5
(See page 3-27)
Front brake
6 *
(See page 3-37,
3-38)
Rear brake
7 *
(See page 3-36,
3-37, 3-38)
Brake hoses
8 *
(See page 3-39)
Wheels
9 *
(See page 4-3,
4-14)
Tires
10 *
(See page 3-48)
Wheel bearings
11 *
(See page 4-3)
Swingarm
12 *
(See page 4-83)
Drive chain
13
(See page 3-42,
4-84)
Steering bearings
14 *
(See page 3-44,
4-71)
email: info@motomatrix.co.uk
CHECK OR MAINTENANCE JOB
• Check fuel hoses for cracks or damage.
• Check condition.
• Clean and regap.
• Replace.
• Check valve clearance.
• Adjust.
• Replace.
• Check operation.
• Adjust.
• Check operation, fluid level and vehicle for fluid
leakage.
• Replace brake pads.
• Check operation, fluid level and vehicle for fluid
leakage.
• Replace brake pads.
• Check for cracks or damage.
• Replace.
• Check runout, spoke tightness and for damage.
• Tighten spokes if necessary.
• Check tread depth and for damage.
• Replace if necessary.
• Check air pressure.
• Correct if necessary.
• Check bearing for looseness or damage.
• Check operation and for excessive play.
• Check chain slack.
• Make sure that the rear wheel is properly aligned.
• Clean and lubricate.
• Check bearing play and steering for roughness.
• Lubricate with lithium-soap-based grease.
LUBRICATION CHART
ODOMETER READING (× 1,000 km)
1
10
√
√
√
√
Every 500 km and after washing the motorcycle or
√
3 - 1
CHK
ADJ
20
30
40
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
Whenever worn to the limit
√
√
√
√
Whenever worn to the limit
√
√
√
√
Every 4 years
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
riding in the rain
√
√
√
√
Every 20,000 km
ANNUAL
CHECK
√
√
√
√
√