Handling The Rear Shock Absorber; Disposing Of A Rear Shock Absorber - Yamaha XT660R 2004 Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
a
email: info@motomatrix.co.uk
REAR SHOCK ABSORBER ASSEMBLY
EAS00686

HANDLING THE REAR SHOCK ABSORBER

WARNING
_
This rear shock absorber contains highly
compressed nitrogen gas. Before handling
the rear shock absorber, read and make
sure you understand the following informa-
tion. The manufacturer cannot be held
responsible for property damage or per-
sonal injury that may result from improper
handling of the rear shock absorber.
• Do not tamper or attempt to open the rear
shock absorber.
• Do not subject the rear shock absorber to
an open flame or any other source of high
heat. High heat can cause an explosion
due to excessive gas pressure.
• Do not deform or damage the rear shock
absorber in
absorber damage will result in poor
damping performance.
EAS00688
DISPOSING OF A REAR SHOCK
ABSORBER
Gas pressure must be released before dispos-
ing of a rear shock absorber. To release the
gas pressure, drill a 2 ~ 3 mm hole through the
rear shock absorber at a point a 30 ~ 60 mm
from its end as shown.
WARNING
_
Wear eye protection to prevent eye damage
from released gas or metal chips.
4 - 76
CHAS
any way. Rear shock