Scanning With The Quick Image Navigator / Panasonic-Dms - Panasonic UB-5315 Operating Instructions Manual

Computer Interfacing
Note
• Board Image Capture cannot be started while
the Panaboard Operation Panel is displayed
using Quick Image Navigator or Panasonic-DMS.
To start Board Image Capture, click [Close] in
the Panaboard Operation Panel window, then
start Board Image Capture.
• To stop Board Image Capture from starting
automatically when the Panaboard is connected,
follow the steps below:
1) Connect your computer and Panaboard with
the USB cable.
2) Click [Start], move the pointer to Settings–
Control Panel, then double-click Scanners
and Cameras.
• For Windows XP, click [Start] and move the
pointer to Control Panel.
For Windows Vista, click [Start] and move
the pointer to Control Panel, then click
Hardware and Sound.
• For Windows 7, click [Start] and move the
pointer to Device and Printers.
3) Double-click Panaboard-UB5 USB Device
Driver and check the Disable device events
check box in the Events tab.
• For Windows 7, right-click Panaboard-UB5
(LT) and then move the pointer to Scan
properties. If the "User Account Control"
window is displayed, click [Yes].
To start Board Image Capture, click [Start], then
move the pointer to Programs–Panasonic–
Board Image Capture–Board Image Capture.
(For Windows XP / Windows Vista / Windows 7,
All Programs is displayed instead of Programs.)
■ Scanning with the Quick Image
Navigator / Panasonic-DMS
You can scan images on the screen to your
computer by operating Quick Image Navigator or
Panasonic-DMS.
1
Click [Start], move the pointer to Programs–
Panasonic–Panasonic Document
Management System–Quick Image
Navigator (for Quick Image Navigator) or
Document Manager (for Panasonic-DMS).
(For Windows XP / Windows Vista / Windows 7,
All Programs instead of Programs.)
2
For Quick Image Navigator: From the File
menu, click Environment Setup..., click
TWAIN tab, then click Select TWAIN-
compliant scanning device....
For Panasonic-DMS: Click the File menu, then
click Select source....
3
Select Panaboard UB5-7 USB TWAIN Driver
and click [Select].
26
4
For Quick Image Navigator: From the File
menu, click Acquire Image... - To Import
Folder... (or To Current Folder...), or click the
(scanner) icon on the Toolbar.
For Panasonic-DMS: Click the File menu, then
click Acquire Image..., or click the (scanner)
icon on the Toolbar.
• The Panaboard Operation Panel appears.
Note
• When the Panaboard Operation Panel is not
displayed, check the USB cable connection
or the condition of the electronic board.
5
Click the (Scan) button or the
(2-Screen Scan) button.
• Scanning starts and the scanned image will
be displayed on the screen of the computer.
It is also possible to start scanning using the
(Copy Key) or
Key) on the electronic board.
6
Click [Close] on the Panaboard Operation
Panel to finish scanning.
• For Quick Image Navigator, the Panaboard
Operation Panel is closed automatically after
scanning.
• For more information about Quick Image
Navigator, refer to the Quick Image Navigator
operating instructions.
• For more information about Document
Manager, refer to the Panasonic-DMS
operating instructions.
Note
• Dragging the Panaboard Operation Panel using
the mouse or activating other software programs
during scanning may cause scanning troubles.
(2-Screen Copy