Panasonic UB-5315 Operating Instructions Manual page 38

Assembling the Electronic Board
3
Collapse the carton box.
Remove the tape and the staples on
the unopened side of the carton box,
then collapse the box.
Top
Bottom
4
Remove the protective plastic bags.
Remove the protective plastic bag
from the screen unit and printer unit.
Set those units on the top of collapsed
shipping box and remove the
cushions.
Cushions
Caution
• Touch the screen film surface gently to avoid
any damage.
5
Attach the screen unit to the
optional stand or wall mounting
fixture.
■ If you are using the stand, refer to
page 46.
■ If you are using the wall mounting
fixture, refer to page 50.
38
Remove the tape
and the staples.
Carton
Protective
plastic bag
Screen unit
Cushions
6
Hang the screen unit to the board
attachment (upper).
Hold the side covers of the screen unit
and hang two hooks of the screen unit
on the left side of the board
attachment (upper).
Shift the screen unit to the left until it
stops. Confirm the left hook is inserted
into the groove of the board
attachment (upper).
• When hanging the screen unit, set the board
attachment frame at the lowest level.
• Be careful not to catch the screen film on the
board attachment frame.
Cover (left)
Cover (right)
7
Remove the shipping screws.
Remove the upper and lower shipping
screws on the folded screen.
Caution
• Remove the lower shipping screw first.
Board attachment
(upper)
Board
attachment
Frame