Control Panel - Panasonic UB-5315 Operating Instructions Manual

■ Control panel

Contrast/Remaining Film
Indicator
Contrast Key
2-Screen Copy Key
Panel Name
Contrast/
Remaining
Film
Indicator
Contrast
Key
2-Screen
Copy Key
Multi-Copy/
Error
Indicator
Multi-Copy/
Stop Key
Copy Key
Advance
Key
Copy Key
This lamp indicator notifies the user when the time to replace the
thermal transfer film is approaching (estimated) and of the
printing contrast used during copying.
Indicator off: Normal printing contrast
Indicator on: Darker than normal printing contrast
Indicator flashing*: Almost time to replace the thermal transfer
film
(Note that only about 15 more sheets may be
copied when this indicator starts flashing.)
Replacement film (UG-6001) is separately available
from the dealer where you purchased your unit.
* The flashing indicator will go out after the power is turned off and the
printer has been opened and closed. (When copying is performed, this
indicator will begin flashing again.)
Each time this key is pressed, the unit will alternate between
normal and dark contrast modes (Normal/Dark).
This key causes the front and back of the screen to be copied on
a single sheet of paper.
This indicator displays the number of copies to be made. The
display changes each time the Multi-Copy/Stop Key is pressed.
Example: 1 → 2 → ··· → 9 → 1 → ···
When an error occurred, a flashing symbol will appear in this display to
indicate the error status. (See page 33.)
When making multiple copies, press this key until the desired
number of copies is displayed on the Multi-Copy/Error Indicator.
This key can also be pressed while multiple copies are being
made to stop the copying process. The display indication
changes while multiple copies are being made as shown below.
After reaching 0, the display will reset to 1.
Example: 5 → 4 → 3 → 2 → 1 → 0 → 1
(countdown display during copying)
This key causes the screen to be copied.
This key advances the screen from right to left.
Part Names and Functions
Advance Key
Multi-Copy/Stop Key
Multi-Copy/Error Indicator
Description
9