Loading Copy Paper - Panasonic UB-5315 Operating Instructions Manual

Loading Copy Paper

It is possible to load up to 40 sheets of Letter size copy paper (assuming a paper weight of 80 g/m
Note that only Letter size paper may be used.
When the unit is first used or when "
paper, load copy paper as described below.
Notes on Loading Copy Paper
Follow the guidelines below to ensure smooth and accurate printing by the unit.
• Only use Letter size copy paper having a weight of 60 to 90 g/m
• Do not simultaneously load paper of varying type and thickness as this may result in paper jams.
• Before adding copy paper, be sure to remove all the copy paper remaining inside the unit's paper
cover. (Note that copy paper will slightly resist being removed, but may be pulled out without
problems.)
After removing the copy paper, stack the removed paper together with the new paper, fan it
thoroughly, square it and reload.
DO NOT USE THE FOLLOWING TYPES OF PAPER
• Extremely smooth or glossy paper
• Coated paper
• Thermal paper
• Paper that is printed on one side
• Wrinkled paper, creased paper, etc.
1
2
12
" flashes on the Multi-Copy/Error Indicator to indicate that the unit is out of
Set the power switch to on ( I ).
• " " will flash on the Multi-Copy/Error Indicator when
copy paper has run out.
• The screen will move to home position and stop.
ON
OFF
Pull the paper cover forward as shown in the left
figure.
2
as the copy paper for this unit.
2
).