Installing Drivers / Board Image Capture - Panasonic UB-5315 Operating Instructions Manual

Electronic board
Hide thumbs Also See for UB-5315:
Table of Contents

Advertisement

■ Installing Drivers / Board Image
Capture
The USB, printer, TWAIN driver and Board Image
Capture are installed in your computer by following
procedures.
Note
• Do not yet connect a USB cable to the
electronic board.
1
Power on your computer and start Windows*
• Log on as an administrator for Windows 2000,
Windows XP, Windows Vista or Windows 7.
Microsoft® Windows® operating system
1
*
(hereafter Windows)
2
Insert the CD-ROM into the CD-ROM drive.
The Setup window appears automatically.
• Depending on the operating system or the
settings that you are using, the Setup
window may not appear automatically.
In such a case, execute "Menu.exe" in the
CD-ROM from the Explorer.
• If the Autoplay dialog box appears in Windows
Vista or Windows 7, click "Run Menu.exe".
3
When "Welcome" window appears, click [Next].
4
Click [Install Panaboard Software].
• If "User Account Control" window is
displayed in Windows Vista, select
[Continue] to continue the installation.
• If "User Account Control" window is
displayed in Windows 7, click [Yes] to
continue the installation.
• To read the operating instructions in the
provided CD-ROM, the Adobe Reader or
Acrobat® Reader must be installed in your
computer. It can be downloaded from the
Adobe's Web site if Internet is available.
5
Read "End-User License Agreement" carefully
and click [Yes].
6
When the following window appears, check
that the electronic board is not connected to
your computer and click [OK].
1
.
• If "Windows can't verify the publisher of this
driver software" is displayed in Windows
Vista or Windows 7, select "Install this driver
software anyway" to continue the installation.
• For Windows 98 or Windows Me, a floppy
disk or CD-ROM for installing the operating
system may be required
• If the screen prompts to restart Windows,
restart Windows.
7
When the following window appears after files
are copied, power the electronic board on, and
connect a USB cable from the electronic
board to your computer.
Computer Interfacing
.
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ub-5815

Table of Contents