Panasonic UB-5315 Operating Instructions Manual page 41

15
After hanging the screen, fix the
stopper screw (left side only).
This prevents the user from adjusting
the screen height at the lowest level by
mistake.
Stopper screw
[ Screw (short)
See page 46.]
16
Attach the printer unit.
Hang the hooks of the printer unit on
the square holes of the board
attachment (lower).
Board attachment (lower)
Printer unit
Caution
• When attaching the printer unit, make sure the
cable is not caught between the metallic frame
and the printer unit.
Assembling the Electronic Board
17
Tighten the screws for the printer
unit.
Use four screws for the optional stand
and two screws for the wall mounting.
■ Optional stand
■ Wall-mounting
41