■ Meanings of error codes
The following table describes the meaning of each of the symbols which may flash in the Multi-Copy/Error
Indicator.
Indication
(Error)
(Screen)
(door)
(Jam)
(ribbon)
(Paper)
(Scanner Failure)
If other indications such as "
Cause
Data transfer error
The screen will not move.
The printer door is not closed
securely.
Paper jam
The thermal transfer film is slack, has
run out or is not installed.
Out of paper
The scanner or screen is in strong
sunlight or strong lighting.
" appear, call your dealer.
Troubleshooting
Remedy
Connect the USB cable securely.
Remove any chart paper attached to
the screen and slowly move the
screen by hand.
Close the printer door securely.
Open the printer door and remove
the jammed paper.
Remove the slack from the thermal
transfer film, replace or install the
thermal transfer film.
Load copy paper.
Change the direction of the screen or
block the light.
See
Page
22
–
11
17
10
16
12
–
33