Panasonic UB-5310 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Computer Hardware
  5. Panaboard UB-5310
  6. Operating instructions manual

Panasonic UB-5310 Operating Instructions Manual

Electronic board
Hide thumbs Also See for UB-5310:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Manual, Operating Instructions Manual
[Stand (option)]
Stand kit is optional.
• Before operating this unit, please read these instructions completely and keep them carefully for future reference.
• This product is designed for installation by a qualified servicing dealer.
Installation performed by non-authorized individuals could cause safety-related problems with the operation of
this equipment.
• To locate the closest authorized dealer in your area, please call 1-800-449-8989.
(for qualified service personnel)
[Wall-mounting]
Electronic Board
Operating Instructions
With Installation Manual
Model No.
UB-5310

Advertisement

Table of Contents
loading

Related Manuals for Panasonic UB-5310

Summary of Contents for Panasonic UB-5310

  • Page 1 (for qualified service personnel) [Stand (option)] [Wall-mounting] Stand kit is optional. UB-5310 Model No. • Before operating this unit, please read these instructions completely and keep them carefully for future reference. • This product is designed for installation by a qualified servicing dealer.
  • Page 2 Thank you for purchasing the Panasonic Electronic Board. For optimum performance and safety, please read these instructions carefully. Accessories Q’ty Q’ty • Markers (red, black, and blue) ..1 each • Letter size copy paper roll [10 m (32.8 ft.)] . . . 1 •...

  • Page 3: Table Of Contents

    • Removing Panasonic-DMS ........

  • Page 4: For Your Safety

    For Your Safety CAUTION: TO PREVENT RISK OF ELECTRIC SHOCK HAZARD, DO NOT REMOVE THE COVER OF THIS PRODUCT, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.

  • Page 5: Precautions

    Precautions Never remove the cover, take apart or modify the Do not position the electronic board in a location where product. This will void the warranty. it is unstable. Do not put drinks, other liquids or heavy items on the After installing or moving the electronic board, lock the tray or screen.

  • Page 6: Cd-Rom

    Precautions Do not lean against the screen or on the cover (lower), Adjust the screen height with two persons after even if the electronic board is mounted on the wall. installation. Confirm both sides of the screen are hung in the same Make sure to tighten the height adjustment handles height slots.
  • Page 7 • Use a shielded USB cable that is certified as logo by USB-IF. • If you connect the electronic board to a USB hub, it is not guaranteed to work. • Do not connect two or more Panasonic electronic boards to a computer. It may cause the computer operation to become unstable.

  • Page 8: Part Names And Functions

    Part Names and Functions Scanner Screen Film Printer Tray Stand The stand is optional. Output Port Control Panel (See page 9 for details.) Power Switch USB Connector (See page 16.) AC Inlet Printer Door Open this door to load Power Cord copy paper or to remove jammed paper.

  • Page 9: Control Panel

    Part Names and Functions ■ Control panel Advance Key Contrast Indicator Copy Key Contrast Key Multi-Copy/Stop Key 2-Screen Copy Key Multi-Copy/Error Indicator Panel Name Description This lamp indicator displays the printing contrast used during copying. Contrast Indicator off: Normal printing contrast Indicator Indicator on: Darker than normal printing contrast Each time this key is pressed, the unit will alternate between...

  • Page 10: Loading Copy Paper

    Loading Copy Paper Turn the power switch on by pressing the “ I ” side of the power switch. • The unit is ready for use when “ ” is displayed on the multi-copy/error indicator. Power Switch • The screen will move to home position and stop. Push the door open button and open the printer Door door.

  • Page 11: Making Copies

    Making Copies This section describes how to copy text and illustrations drawn on the screen. Turn the power switch on by pressing the “ I ” side of the power switch. • The unit is ready for use when “ ”...

  • Page 12: Copy Types And Procedures

    Making Copies ■ Copy types and procedures Copy Type Procedure Copying the front of Press the screen Copying the back of Press to move the screen to be copied to the front. the screen Press Making multiple Select the number of copies (1 to 9) by pressing copies (up to 9) necessary.

  • Page 13: Paper Jams

    Paper Jams To release jammed paper: Push the door open button and open the printer door. Door Open Button Remove the jammed paper by pulling the paper roll to the direction A. If the jammed paper is still in the cutter cover, remove it using tweezers from slot B.

  • Page 14: Screen Height Adjustment

    Screen Height Adjustment The screen can be adjusted at 3 levels except for the lowest level. The lowest level of the board attachment frame is designed for installation of the screen, so the printer cannot be attached at this level. Adjust the level of the screen unit as follows.
  • Page 15 Screen Height Adjustment Tighten the height adjustment handles. Height Be sure to tighten the height adjustment handles adjustment handles firmly after adjusting the level of the screen. Height adjustment handles Store the step frame by hanging it on the board Step frame attachment (upper).

  • Page 16: Computer Interfacing

    Speed USB 2.0, this electronic board functions with it is not guaranteed to work. Full Speed USB 2.0. • Do not connect two or more Panasonic electronic Microsoft® Windows® 98 operating system boards to a computer. It may cause the computer (hereafter Windows 98) operation to become unstable.

  • Page 17: Installing Drivers / Board Image Capture

    Computer Interfacing ■ Installing Drivers / Board Image When the following window appears, check Capture that the electronic board is not connected to your computer and click [OK]. The USB, printer, TWAIN driver and Board Image Capture are installed in your computer by following procedures.

  • Page 18: Installing Quick Image Navigator / Panasonic-Dms

    Windows 7: Quick Image Navigator For Windows 98 / Windows Me: Panasonic-DMS ■ Removing Drivers / Board Image If Panasonic-DMS is already installed, you do not need to uninstall it. Capture / Quick Image Navigator If you need to remove the USB driver, printer driver, Power on your computer and start Windows.

  • Page 19: Removing Panasonic-Dms

    (Scan) button or the ■ Removing Panasonic-DMS (2-Screen Scan) button. • When scanning is completed, the Save Scan If you need to remove Panasonic-DMS, perform the Image dialog box appears. following steps. Power on your computer and start Windows. Click [Start], move the pointer to Programs–...

  • Page 20: Scanning With The Quick Image Navigator / Panasonic-Dms

    Quick Image Navigator or Panasonic-DMS. (scanner) icon on the Toolbar. To start Board Image Capture, click [Close] in For Panasonic-DMS: Click the File menu, then the Panaboard Operation Panel window, then click Acquire Image..., or click the (scanner) start Board Image Capture.

  • Page 21: Panaboard Operation Panel

    Computer Interfacing ■ Panaboard Operation Panel It is possible to perform the same operations as with the electronic board control panel (page 9) from the following Panaboard Operation buttons. Note • While the Panaboard Operation Panel is displayed, the Copy Key and 2-Screen Copy Key on the electronic board control panel are used for scanning images into the computer.

  • Page 22: Printing

    Computer Interfacing Panel Name Description The status box displays the status of the TWAIN driver and the electronic board. Stand by: The electronic board is stand by. Both of the Panaboard Operation Panel and the electronic board control panel are operational. Rotating: The electronic board is rotating the screen.

  • Page 23: Daily Care And Maintenance

    Daily Care and Maintenance Always turn off the power switch and unplug the power plug when cleaning outside and inside the unit. ■ Cleaning the screen and the unit Gently wipe the screen film and unit with a water- dampened cloth that has been thoroughly wrung. Notes •...
  • Page 24 Daily Care and Maintenance Clean the Printer Head Dampen the tip of a cotton swab in ethyl alcohol and gently wipe the printer head. Note • Never touch the printer head or the surrounding area with your hands as this may disable copying. Printer head (Gold) Cotton swab Clean the Paper Feed Roller...

  • Page 25: Troubleshooting

    Install the new Panasonic-DMS again as follows. menu or cannot be used after 18-19 1. Uninstall the current Panasonic-DMS. installing the Panasonic- 2. Install the old Panasonic-DMS. DMS. 3. Install the new Panasonic-DMS in the same folder with the old one.

  • Page 26: Meanings Of Error Codes

    Troubleshooting Symptom Care and Remedy Page The old Panasonic-DMS is not uninstalled if the old version of the Panasonic Document Panasonic-DMS has been installed before installing the new one. Management System menu Uninstall the old Panasonic-DMS from the Add / Remove is remained in the Programs Programs of the Control Panel.

  • Page 27: Specifications

    Specifications Model No. UB-5310 Power supply AC 100 –120 V, 50/60 Hz Power consumption 1.4 A (Operational) 1440 mm × 1372 mm × 233 mm External dimensions (Height × Width × Depth, " × 4' 6" × 9 (4' 8 "...
  • Page 28 Installation Manual (for qualified service personnel) Table of Contents Assembling the Electronic Board ..... . 29 ● Accessories for assembling....... 29 ●...

  • Page 29: Assembling The Electronic Board

    Assembling the Electronic Board ■ Accessories for assembling The package includes the parts for setting up the electronic board shown below. Make sure that all of these parts are included in the package before proceeding. Part Name Illustration/Quantity Remarks Q’ty Board attachment (upper) [*Wall-mounting...

  • Page 30: Assembly

    Assembling the Electronic Board ■ Assembly Assemble the optional stand or wall-mounting fixture. ■ If you are using a stand, refer to page 39. ■ If you are using a wall-mounting fixture, refer to page 43. Remove the electronic board from the shipping box. Remove the joints, then remove the electronic board from the shipping box.
  • Page 31 Assembling the Electronic Board Collapse the carton box. Hang the screen unit to the board attachment (upper). Remove the tape and the staples on the unopened side of the carton box, Hold the side covers of the screen unit then collapse the box. and hang two hooks of the screen unit on the left side of the board Remove the tape and the staples.
  • Page 32 Assembling the Electronic Board Extend the screen unit. Extend the screen unit. Open the center and right panels of Hang the right hook of the screen unit the screen unit as shown below and on the board attachment (upper). remove the cushion. Right hook Cushion Caution...
  • Page 33 Assembling the Electronic Board ■ Adjusting the level of the screen Hang the screen in the desired slots of the slide plates and tighten the unit (Step 12–15: only for use of handles. the optional stand) At the lowest level of the board attachment frame, the printer cannot be installed.
  • Page 34 Assembling the Electronic Board After hanging the screen, fix the Tighten the screws for the printer stopper screw (left side only). unit. This prevents the user from adjusting Use four screws for the optional stand the screen height at the lowest level by and two screws for the wall mounting.
  • Page 35 Assembling the Electronic Board Connect the cables (2) to the screen Attach the cover (upper). panel connectors. Hook the cover with the projections on both sides, then cover the top of the board attachment (upper). Board attachment (upper) Remove the folding support screw on the front side of the screen unit, Cover (upper) then store the folding support on...
  • Page 36 Assembling the Electronic Board Attach the cover (lower). Attach the rear cover. (only for use of the optional stand) (1) Push the cover in the direction of the arrow until it clicks. (2) Fix the cover with the wing bolt. Adhesive tape Rivets...

  • Page 37: Electronic Board Operations Check

    Electronic Board Operations Check After assembling the electronic board, perform the procedures presented in the following table to make sure it functions properly. Points to Check Step Symptom Solutions Turn on the power switch. (Normal operation) “ ” flashes after “ ” lights up. (If not) Check power cord and cables.

  • Page 38: Repacking

    Repacking Perform Assembly Steps 2 through 24 in reverse to repack the electronic board and accessories. Use the joints to fasten the shipping box to the lower box. Board attachment (lower) Board attachment (upper) Cover (upper) · Paper holder Manuals, CD-ROM Copy paper roll Power cord Screws and spacers...

  • Page 39: Assembling The Optional Stand (Ue-608005)

    Assembling the Optional Stand (UE-608005) ■ Accessories The package box for the optional stand includes the parts noted below; please confirm that all parts are present before beginning installation Part name Illustration Q’ty Part name Illustration Q’ty Base pipe Screw Height Reinforce pipe adjustment...

  • Page 40: Assembly

    Assembling the Optional Stand (UE-608005) ■ Assembly Assembling the stand ■ Assembling the fall-prevention extension legs The fall-prevention extension legs are effective in increasing the safety of the electronic board. • Caster locks are attached Fall-prevention extension legs to the back side. Caution •...
  • Page 41 Assembling the Optional Stand (UE-608005) Assembling the board attachment frame Stamp “UL” Board attachment (upper) Stamp “UR” Slide plate (left) Stamp “LL” Slide plate Stamp “LR” (right) Board attachment (lower) • The board attachments (upper and lower) are supplied with the electronic board. •...
  • Page 42 Assembling the Optional Stand (UE-608005) Step B Place the screws with the board attachment frame in the grooves of the side pipes. Board attachment frame Side pipe • When the side pipe leans to the inside, stand it up and attach the board attachment frame. Step C Insert the screws into the side pipes from the inside.

  • Page 43: Wall-Mounting

    Wall-mounting ■ Wall-mounting fixture The wall-mounting fixture includes the board attachment (upper and lower) supplied with the unit. Before attempting installation of this wall-mounting fixture, we strongly recommend consulting with the building manager, engineer, or architect. The installer needs to know the type of construction used for the wall intended for this installation and the location of wall studs.

  • Page 44: Wall-Mounting Procedure

    Wall-mounting ■ Wall-mounting procedure Confirm that the wall is strong enough to support the weight of the electronic board. Caution The wall must be capable of supporting at least 1128N [115 kgf (254 lbs.)]. 1) Assemble the wall-mounting template by taping the Wall-mounting template 1 (TOP) to Wall-mounting template 2 (BOTTOM).

  • Page 45: Attaching The Wall-Mounting Fixtures

    Wall-mounting ■ Attaching the wall-mounting fixtures The electronic board must be mounted with the method most suited to the material of the wall. Three methods are presented here. (Other options may be available in your area.) ● Attaching to metal or concrete walls Stud plugs (sold in stores) are needed.
  • Page 46 Wall-mounting ● Attaching to wooden walls Use wood screws (sold in stores). Wall-mounting fixture Wood screw For the correct hole size, refer to the instructions for the particular wood screws used. Wooden wall...
  • Page 48 Panasonic System Networks Company of America Unit of Panasonic Corporation of North America One Panasonic Way, Secaucus, New Jersey 07094 © Panasonic System Networks Co., Ltd. 2002 PJQXB0050VA-F K0503E5020...

Table of Contents