Panasonic UB-5315 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Interactive whiteboard
  5. Panaboard UB-5315
  6. Operating instructions manual

Panasonic UB-5315 Operating Instructions Manual

Electronic board
Hide thumbs Also See for UB-5315:
Table of Contents

Advertisement

Quick Links

See also: Installation Manual , Operating Instructions Manual
[Stand (option)]
The unit in this picture is UB-5315 series.
(Stand kit is optional.)
• To assemble this unit, please refer to the Installation Manual.
• Before operating this unit, please read these instructions completely and keep them carefully for future reference.
• Because of the nature of the print film, all the printed text will remain on the film.
[Wall-mounting]
Electronic Board
Operating Instructions
Model No.
English . . . . . . . . . . . . . . . . . .1–34
Français . . . . . . . . . . . . . . . .35–68
Deutsch . . . . . . . . . . . . . . .69–102
Español . . . . . . . . . . . . . .103–136
Italiano . . . . . . . . . . . . . . .137–170
Nederlands . . . . . . . . . . .171–204
Svenska . . . . . . . . . . . . . .205–238
中 文 . . . . . . . . . . . . . . . .239–272
Русский . . . . . . . . . . . . . .273–306
UB-5315
UB-5815

Advertisement

Table of Contents
loading

Related Manuals for Panasonic UB-5315

Summary of Contents for Panasonic UB-5315

  • Page 1 [Wall-mounting] Model No. UB-5815 The unit in this picture is UB-5315 series. (Stand kit is optional.) English ....1–34 Français ....35–68 Deutsch .
  • Page 2 Thank you for purchasing the Panasonic Electronic Board. For optimum performance and safety, please read these instructions carefully. Record these items for future reference Model number: _________________________ Date of purchase: ________________________ Serial number: _________________________ Dealer’s name: __________________________ Dealer’s address: ______________________________________________________________________...

  • Page 3: Table Of Contents

    • Removing Panasonic-DMS ........

  • Page 4: For Your Safety

    The product should be used only with the power cord cover is obtained. A replacement fuse cover can be that is supplied by the manufacturer. purchased from your local Panasonic Dealer. Stop operation immediately if your product emits If the fitted moulded plug is unsuitable for the socket...

  • Page 5: Precautions

    Precautions Never remove the cover, take apart or modify the Do not position the electronic board in a location where product. This will void the warranty. it is unstable. Do not put drinks, other liquids or heavy items on the After installing or moving the electronic board, lock the tray or screen.

  • Page 6: Cd-Rom

    Precautions Have the unit installed, removed and CHOKING HAZARD disposed of only by qualified service Keep the marker’s cap out of reach of personnel. children to prevent swallowing. When the unit will no longer be used, in order to prevent it from falling, do not leave the unit installed, but remove it.
  • Page 7 • Use a shielded USB cable that is certified as logo by USB-IF. • If you connect the electronic board to a USB hub, it is not guaranteed to work. • Do not connect two or more Panasonic electronic boards to a computer. It may cause the computer operation to become unstable.

  • Page 8: Part Names And Functions

    Part Names and Functions Scanner Screen Film Printer Tray Stand The stand is optional. Output Port Control Panel This port holds up to 10 (See page 9 for details.) sheets of output paper. Power Switch Printer Open Lever Push down this lever to AC Inlet open the printer door.

  • Page 9: Control Panel

    Part Names and Functions ■ Control panel Advance Key Contrast/Remaining Film Copy Key Indicator Contrast Key Multi-Copy/Stop Key 2-Screen Copy Key Multi-Copy/Error Indicator Panel Name Description This lamp indicator notifies the user when the time to replace the thermal transfer film is approaching (estimated) and of the printing contrast used during copying.

  • Page 10: Installing The Thermal Transfer Film

    Installing the Thermal Transfer Film Install the thermal transfer film in the printer. Set the power switch to on ( I ). • “ ” will flash on the Multi-Copy/Error Indicator when the thermal transfer film has run out. • The screen will move to home position and stop. Push down the printer open lever and open the printer door.
  • Page 11 Installing the Thermal Transfer Film 3) Place the blue gear on the front right groove. Blue gear 4) Place the white shaft on both sides of the back grooves. White shaft Tighten the film, then close the printer door. 1) Rotate the blue gear in the direction of the arrow to take up the slack on the film.

  • Page 12: Loading Copy Paper

    Loading Copy Paper It is possible to load up to 40 sheets of A4 (Letter*) size copy paper (assuming a paper weight of 80 g/m Note that only A4 (Letter*) size paper may be used. When the unit is first used or when “ ”...
  • Page 13 Loading Copy Paper To prevent paper jams such as those caused by multiple sheets feeding at once, fan the paper thoroughly, square it, align it with the guide inside, and insert as far as it will go. Notes • Only use A4 (Letter*) size copying paper having a weight of 60 to 90 g/m as the copy paper for this unit.

  • Page 14: Making Copies

    Making Copies This section describes how to copy text and illustrations drawn on the screen. Set the power switch to on ( I ). • “ ” will light on the Multi-Copy/Error Indicator to indicate that the unit is ready to copy. •...

  • Page 15: Copy Types And Procedures

    Making Copies ■ Copy types and procedures Copy Type Procedure Copying the front of Press the screen Copying the back of Press to move the screen to be copied to the front. the screen Press Making multiple Select the number of copies (1 to 9) by pressing copies (up to 9) necessary.

  • Page 16: Replacing The Thermal Transfer Film

    Thermal transfer film is replaced as follows. Notes on Replacing Thermal Transfer Film • Only use the designated product (UG-6001) from Panasonic as the replacement film. (Note that using another type of replacement film may result in degraded printing quality or damage to the unit.) •...

  • Page 17: Paper Jams

    Paper Jams Remove paper jams by the following procedure when copy paper does not come out of the output port or when “ ” flashes on the Multi-Copy/Error Indicator. Push down the printer open lever to open the printer door. Remove the thermal transfer film with both hands.
  • Page 18 Paper Jams Install the thermal transfer film. • Refer to steps 3 and 4 in the section of “Installing the Thermal Transfer Film” on page 10, 11. • “ ” flashing on the Multi-Copy/Error Indicator will go out. Notes • If “ ”...
  • Page 19 Paper Jams To prevent paper jams such as those caused by multiple sheets feeding at once, fan the paper thoroughly, square it, align it with the guide inside, and insert as far as it will go. Note • Do not stack more copy paper in the unit than the maximum paper limit indicated by the guide (see figure to the left) as this may result in paper jams.

  • Page 20: Screen Height Adjustment

    Screen Height Adjustment The screen can be adjusted at 3 levels except for the lowest level. The lowest level of the board attachment frame is designed for installation of the screen, so the printer cannot be attached at this level. Adjust the level of the screen unit as follows.
  • Page 21 Screen Height Adjustment Tighten the height adjustment handles. Height Be sure to tighten the height adjustment handles adjustment handles firmly after adjusting the level of the screen. Height adjustment handles Store the step frame by hanging it on the board Step frame attachment (upper).

  • Page 22: Computer Interfacing

    Speed USB 2.0, this electronic board functions with it is not guaranteed to work. Full Speed USB 2.0. • Do not connect two or more Panasonic electronic Microsoft® Windows® 98 operating system boards to a computer. It may cause the computer (hereafter Windows 98) operation to become unstable.

  • Page 23: Installing Drivers / Board Image Capture

    Computer Interfacing ■ Installing Drivers / Board Image Read “End-User License Agreement” carefully Capture and click [Yes]. When the following window appears, check The USB, printer, TWAIN driver and Board Image that the electronic board is not connected to Capture are installed in your computer by following your computer and click [OK].

  • Page 24: Installing Quick Image Navigator / Panasonic-Dms

    For Windows 2000 / Windows XP / Windows Vista / Windows 7: Quick Image Navigator For Windows 98 / Windows Me: Panasonic-DMS If Panasonic-DMS is already installed, you do not need to uninstall it. Power on your computer and start Windows.

  • Page 25: Removing Drivers / Board Image Capture / Quick Image Navigator

    Panasonic Quick Image Navigator. Follows the instructions on the screen. After uninstalling, restart your computer. ■ Removing Panasonic-DMS If you need to remove Panasonic-DMS, perform the following steps. Power on your computer and start Windows. Click [Start], move the pointer to Programs–...

  • Page 26: Scanning With The Board Image Capture

    Panel window to end the session. Note • Board Image Capture cannot be started while the Panaboard Operation Panel is displayed using Quick Image Navigator or Panasonic-DMS. To start Board Image Capture, click [Close] in the Panaboard Operation Panel window, then start Board Image Capture.

  • Page 27: Scanning With The Quick Image Navigator / Panasonic-Dms

    • For more information about Document TWAIN tab, then click Select TWAIN- Manager, refer to the Panasonic-DMS compliant scanning device..operating instructions. For Panasonic-DMS: Click the File menu, then click Select source..Note Select Panaboard UB5-7 USB TWAIN Driver and click [Select].

  • Page 28: Panaboard Operation Panel

    Computer Interfacing ■ Panaboard Operation Panel It is possible to perform the same operations as with the electronic board control panel (page 9) from the following Panaboard Operation buttons. Note • While the Panaboard Operation Panel is displayed, the Copy Key and 2-Screen Copy Key on the electronic board control panel are used for scanning images into the computer.

  • Page 29: Printing

    Computer Interfacing Panel Name Description 2-Screen Copy This button causes the front and back of the screen to be Button copied on a single sheet of paper. Copy Button This button causes the screen to be copied. The status box displays the status of the TWAIN driver and the electronic board.

  • Page 30: Daily Care And Maintenance

    Daily Care and Maintenance Always turn off the power switch and unplug the power plug when cleaning outside and inside the unit. ■ Cleaning the screen and the unit Gently wipe the screen film and unit with a water- dampened cloth that has been thoroughly wrung. Notes •...
  • Page 31 Daily Care and Maintenance Clean the Printer Head Dampen the tip of a cotton swab in ethyl alcohol and gently wipe the printer head. Note • Never touch the printer head or the surrounding area with your hands as this may disable copying. Cotton swab Printer head (Gold)

  • Page 32: Help Troubleshooting

    Install the new Panasonic-DMS again as follows. menu or cannot be used after 24-25 1. Uninstall the current Panasonic-DMS. installing the Panasonic- 2. Install the old Panasonic-DMS. DMS. 3. Install the new Panasonic-DMS in the same folder with the old one.

  • Page 33: Meanings Of Error Codes

    Troubleshooting Symptom Care and Remedy Page The old Panasonic-DMS is not uninstalled if the old version of the Panasonic Document Panasonic-DMS has been installed before installing the new one. Management System menu Uninstall the old Panasonic-DMS from the Add / Remove is remained in the Programs Programs of the Control Panel.

  • Page 34: Specifications

    Specifications Model No. UB-5315 UB-5815 Power supply Refer to the name plate on the printer Power consumption Refer to the name plate on the printer (Operational) 1334 mm × 1372 mm 1334 mm × 1735 mm External dimensions (Height × Width × Depth, ×...

This manual is also suitable for:

Ub-5815

Table of Contents