Panasonic UB-5315 Operating Instructions Manual page 30

Daily Care and Maintenance
2
3
4
Latches
30
Clean the Printer Head
Dampen the tip of a cotton swab in ethyl alcohol
and gently wipe the printer head.
Note
• Never touch the printer head or the surrounding area
with your hands as this may disable copying.
Cotton swab
Printer head
(Gold)
Clean the Platen Roller and the Pick-up Roller
Pick-up roller
Platen roller
Remove the thermal transfer film with both hands
and carefully wipe any dirt or stains off the platen
roller and pick-up roller.
• For details on removing the thermal transfer film, see
page 16.
• Dampen a soft cloth with neutral kitchen cleaner
diluted in water, wring the cloth thoroughly, and wipe
the entire surface of the rollers while rotating them. If
this does not remove all dirt, wipe with a cloth
dampened with ethyl alcohol.
Install the thermal transfer film in its original
position and close the printer door.
• For details on installing the thermal transfer film, see
pages 10, 11.
• Close the printer door firmly until a click is heard.
Note
• If "
make sure that the thermal transfer film has been
installed properly and tightened.
• The printer door should be closed to make copies
properly. Confirm both latches are locked.
" is still flashing after closing the printer door,