Part Ii - Power Cable With Flying Leads; Part Iii - Power Connector And Cable Assembly Instructions - Motorola 2.1 Networking Setup Manual

Motorola network hardware user manual
Table of Contents

Advertisement

Appendix A:
Part II – Power Cable with Flying Leads
1.
The initial Power Cable will have three wires: Brown (Line), Green (Ground), and Blue (Neutral).
Figure 9-14
Part III – Power Connector and Cable Assembly Instructions
1.
Loosen the Strain Relief Screws on the plug.
Figure 9-15
Strain Relief Bar Screws (2)
Initial Power Cable View
Side View of Plug Showing Detail of the Stress Relief Bar and Screws
Strain Relief Bar
BROWN Wire is Line
BLUE Wire is Neutral
GREEN Wire is Earth Ground
9-16

Advertisement

Table of Contents
loading

This manual is also suitable for:

Motomesh duo 2.1

Table of Contents