Enclosure Side 1 - Motorola 2.1 Networking Setup Manual

Chapter 3: MOTOMESH Duo Hardware

Enclosure Side 1

Figure 3-1 details the following ports and connections:
If a personality plug is attached to the select port DC power will be supplied on pins 4, 5 and 7, 8 of the
PoE OPT Ethernet port.
personality plug as the device could be
Figure 3-1
MAC Address
2.4 GHz Antenna Port
•
Device MAC Address (Ethernet MAC address)
•
Power LED (This LED indicates device power only)
•
2.4 GHz Antenna Port (Female N-Type connector)
•
Vent (Pressure)
•
Select Port (When a personality plug is attached standard power over Ethernet
(802.3af PoE) or Canopy Connect (PoE) is sourced on the POE OPT Ethernet port
(See side 2).
[Do not attach a non capable PoE device to this port when using a
Enclosure Side 1
damaged].
Power LED
3-2
Select Port