Configuring A Radius Client; Configuring A Radius Client; Configure Radius User; Procedure 2-13 Configuring A Radius User - Motorola 2.1 Networking Setup Manual

Chapter 2: Network Setup
4
Double click on Native User. Select MS-CHAP-V2 in the left window pane. Click the right
arrow in the center and move it to the right window pane. Click OK.
5
Click Apply on the menu bar at the top.

Configuring a Radius Client

Next we need to configure Steel Belted Radius to accept the r0kd daemon as a radius client.
The r0kd daemon runs on the Wireless Manager server.
Procedure 2-12 Configuring A Radius Client
1
On the menu tree on the left click RADIUS clients.
2
Click on the Add button on the menu bar.
3
Click on the Any Radius Client checkbox.
4
Enter a Radius Shared secret in the shared secret text box (in our reference design we chose
mesh)
5
Under the Make or model checkbox select Standard Radius
6
Click OK

Configure RADIUS User

Finally we need to configure the username and password that MOTOMESH Duo nodes will
use when authenticating to the RADIUS server when running Secure Mesh. All MOTOMESH
Duo devices share a single username and password.

Procedure 2-13 Configuring A Radius User

1
On the menu tree on the left expand the Users branch. Click on Native.
2
Enter in a username (in our reference design we used the username user)
3
Enter in a password (in our reference design we used the password password)
4
Click OK
2-31