Australian Wiring Instructions; Part I - Power Connector Parts; Figure 9-23 Front View Of The Australian Power Connector Plug; Figure 9-24 Side View Of The Australian Power Connector Plug - Motorola 2.1 Networking Setup Manual

Appendix A:

Australian Wiring Instructions

The following instructions describe how to assemble the enclosed power connector to the power
cable's flying leads.
Part I – Power Connector Parts
1.
The (out-of-the-box) Australian power connector plug along with its power assignment is shown in the
graphics below.
Figure 9-23
Front View
LINE
Figure 9-24
Side View - showing an access
Access Screw
2.
Loosen the Access Screw on the plug until its contents are accessible, as shown in the graphics
below.
Front View of the Australian Power Connector Plug
GROUND
NEUTRAL
Side View of the Australian Power Connector Plug
GROUND
NEUTRAL
LINE
9-20