Figure 9-25 Front View Of The Australian Power Connector Plug With Opened Sides; Figure 9-26 Side View Of The Australian Power Connector Plug With Opened Sides; Figure 9-27 Inside View Of The Australian Power Connector Plug - Motorola 2.1 Networking Setup Manual

Appendix A:
Figure 9-25
Access Screw
Figure 9-26
3.
Place the plug down with its contents open and facing up. The Strain Relief section of the plug should
be on the left hand side, as shown in the graphic below.
Figure 9-27
GROUND
Strain Relief Section (2 screws)
Front View of the Australian Power Connector Plug with Opened Sides
Side View of the Australian Power Connector Plug with Opened Sides
Inside View of the Australian Power Connector Plug
LINE
NEUTRAL
Access Screw
Access Screw
9-21