Annex 6 - Instructions For Use (Regulatory Content) Motomesh 2.4/5.8 Ghz Radio; European Union Notification - Motorola 2.1 Networking Setup Manual

Motorola network hardware user manual
Table of Contents

Advertisement

Chapter 6: Certification and Safety Information
This equipment is marked
directive 1999/5/EC and that National restrictions apply.
The relevant Declaration of Conformity can be found at
http://motorola.canopywireless.com/doc.php
Annex 6 – Instructions for use (regulatory content)
MOTOMESH 2.4/5.8 GHz Radio

European Union Notification

The CE mark is the official marking required by the European Community for all Electric and
Electronic equipment that will be sold, or put into service for the first time, anywhere in the
European community. It proves to the buyer or uses that this product fulfills all essential
safety and environmental requirements as they are defined in the European Directives.
The 2.4GHz/5.8GHz product range marked with the following CE marks,
Carry the alert symbol
member states. Products marked with both these CE numbers are only suitable for use in
the following EU member states: -
The CE mark acknowledges that the product is in compliance with regulations of the
European Radio & Telecommunications Terminal Equipment (R&TTE) directive 1999/5/EC
and other relevant directives. See section Declaration of Conformity section (found later in
this chapter) with the applicable directives.
Note: This product only operates in the following channels (20MHz channel size) in the
5.8GHz band.
1
For use in the UK, Republic of Ireland, and Norway, the frequency range 5795-5815 MHZ
shall not be used and should be notched out to protect RTTT devices. Users must therefore
1321
to denote the product is not suitable for deployment in all EU
Ireland
Norway
UK
Channel
Frequency (MHz)
Number
149
153
157
161
to show compliance with the European R&TTE
&
5745
5765
5785
1
5805
6-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Motomesh duo 2.1

Table of Contents