Options Stored In Status (S-) Registers - Motorola 3460 Fast’R User Manual

Options Stored in Status (S-) Registers

Some AT command options are stored in status registers.
S-Register Command Cross-Reference
Register Parameter
S0 Ring Count to
Answer On*
S1 Current Ring
Count*
S2 Escape Code
Character*
S3 Return
Character*
S4 Line Feed
Character*
S5 Backspace
Character*
S6 Wait For Dial Tone ATS6=n
S7 Wait For Data
Carrier
(Country-specific
for France only)
S8 Dial Modifiers
S10 DCD Loss
Disconnect
*Changed values are not automatically stored to non-volatile memory. To retain changed
values, save them to an option set.
3460 Fast'R
Command
(Default
Value)
ATS0=n Modem answers a call after ring n
(0)
ATS1 Counts rings (view only)
(0)
ATS2=x Defines character used to change
from data mode to command
(43)
mode.
ATS3=x Set command-line termination
character
(13)
ATS4=x Set response formatting character
(10)
ATS5=x Set command-line editing
character
(8)
Set duration
(3)
ATS7=n Set duration
AT*DD9 Dial Wait=S7
AT*TT5 Call Timeout=S7
(30)
ATS0=x Set comma character
(3)
ATS10=n Set delay duration; varies with the
modulation mode:
(15)
• V.34, V.32:
— 0=Disabled
— 1-19=Specified sec.
— 20-255=20 sec.
• V.22bis, V.21, B212, B103:
— 0=Disabled
— 1-255=Specified 0.1 sec
Description
B-31