Configuration And Phone Number Access Restriction - Motorola 3460 Fast’R User Manual

Enabling Callback Verification and Dial Restriction
Step
3. Store a callback telephone number in the device selected in the
previous step, using the AT&Z (Enter Phone Number) command
there.
4. If you selected the remote modem as the callback-number source,
use the AT
is mandatory (AT
With the Mandatory option, the remote modem must supply a
callback number during its initial call, or the local modem
disconnects and does not make a callback.
With the Optional option, the remote modem may establish a call
without supplying a callback number. The local modem does not
disconnect.
To prevent the local modem from executing an Auto Redial
5.
command, issue the AT
To prevent the modem from calling any number except those stored
in the Phonebook, issue the AT
*
ZC parameter default value is Off (AT
Configuration and Phone Number Access
Restriction
Configuration and Phone Number Access Restriction apply to a local
modem. With this function enabled, you must enter a correct password
before performing the following operations:
• Listing, echoing, or storing Phonebook entries
• Changing configuration options
You do not need to enter the password to perform these functions:
• Dial a stored Phonebook number
• Answer an incoming call
After storing a password in a modem, enable configuration and phone
number access restriction by issuing the AT
summary of access security commands follows.
3460 Fast'R
ZR command to specify whether supplying the number
*
ZR1) or optional (AT
*
ZD1 command.
*
Stage
ZR0).
*
ZD1 command.
*
*
ZC0).
PF command to lock it. A
*
3-15