Access Security Functions; Password Verification On Connection - Motorola 3460 Fast’R User Manual

Access Security Functions

Password Verification on Connection

Password verification applies to incoming calls. With password
verification, the answering modem must receive a password from the
calling device, then validate it internally or send it to a Motorola
network-management system (NMS) for validation, in order to
complete the connection. If a password is invalid, the modem
disconnects.
Enabling Password Verification by a Local Modem
Step
1. Use the AT
Use the AT
2.
in the local modem.
3. Use the AT
4. Use the AT
in the remote modem.
Callback verification and restriction apply to incoming calls.
With callback verification, the answering modem that successfully
completes password verification with a calling modem hangs up, then
calls the modem back. The modems then pass data.
With callback dial restriction, the answering modem calls back only
stored Phonebook numbers, not numbers sent by a calling modem.
Enabling Callback Verification and Dial Restriction
Step
1.
Configure password verification, as described above.
2. Use the AT
callback phone number source:
• The local modem (AT
entry to call)
• The remote modem (AT
secondary channel.
*
ZC parameter default value is Off (AT
3-14
3460 Fast'R
ZI command to enter a password in the local modem.
*
ZV1 command to enable internal password verification
*
ZI command to enter a password in a remote modem.
*
ZV1 command to enable internal password verification
*
ZC command* in the local modem to specify the
*
ZCn, where n indicates which Phonebook
*
ZC10). This option does not use the
*
Stage
Stage
*
ZC0).