Motorola 3460 Fast’R User Manual page 122

AT Command Set (continued)
Command Option
MD
*
0
1
MM
*
0
1
2
3
4
5
6
7
8
9
10
11
12
13
MN
*
0
1
2
3
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country's options,
refer to the 3460 Fast'R Reference Guide (T0022).
Default (pre-set) options are underlined.
B-12
3460 Fast'R
Description
PSTN Signaling
Determines the modem's disconnect signaling when
operating in the V.34, V.32bis, or V.32 (coded or
uncoded) modulation modes.
=Disable
=Enable
Modulation Mode
Determines the modulation mode used in data
transmission. Changing mode resets AT
(Max Rate) and AT MN (Min Rate) to their defaults for
*
the mode selected.
=V.34 Auto (Dial Only)
=V.34 Only
=V.32bis Auto (Dial Only)
=V.32bis Only
=V.32 Auto (Dial Only)
=V.32 Only
=V.32 Uncoded
=V.23 Only
=V.22bis Only
=V.22 Only
=212 Auto
=V.21 Only
=103 Only
=V.23 Half Duplex (Dial Only)
Minimum Rate
Sets the minimum communication rate.
=75 BPS
=300 BPS
=600 KBPS
=1.2 KBPS
MX
*