Power Interface - Motorola 3460 Fast’R User Manual

The enclosure has two female 8-pin DIN connectors for connection to a
network management system.
Network Management Interface Pin-outs
Pin
2
3
4
7
8
Pins not listed here are not used.
The enclosure has one power interface connector.

Power Interface

Power Type
AC
DC
The off-line configuration (OLC) button is on the front of the modem
card.
Pressing the button makes the modem enter command mode, in which
you can change configuration options in synchronous or leased line
environments.
Changing a Configuration With the OLC Button
Step
1.
Change one or more configuration options.
2. Enter the Save to Option Set command (AT&Wn, where n is 1 or 2).
3. Enter the Option Set to Power Up In command (AT&Yn, where n is:
0 for last-loaded option set; 1 for Option Set 1, or 2 for Option Set 2)
4. Press the OLC button. The modem restarts and powers up using the
selected configuration option set.
3460 Fast'R
NM OUT
TXD
RXD
RTS
Signal Ground
DCD
Industry Standard
Barrier strip
Stage
NM IN
TXD
RXD
RTS
Signal Ground
DCD
Connector
C-11