Motorola 3460 Fast’R User Manual page 130

AT Command Set (continued)
Command Option
2
3
TR
*
0
1
2
3
TT
*
0
2
3
5
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country's options,
refer to the 3460 Fast'R Reference Guide (T0022).
Default (pre-set) options are underlined.
B-20
3460 Fast'R
Description
=Reliable. In async applications, once the local modem
connects with a remote modem, it attempts to establish
an error-corrected link. The modem uses speed
conversion (if enabled). The local modem disconnects if
it cannot establish an error-corrected link. Enable
terminal flow control in this mode. If the modem
negotiates a connection in V.21 or Bell 103 modulation
mode, it terminates the call. Note: the modem does not
support LDL tests in this mode.
=Auto-Reliable. Once the local modem connects with a
remote modem, it attempts to establish an error-
corrected link. The modem uses speed conversion
(if enabled). This lets the modem automatically
accommodate computers of different rates. The modem
reverts to Normal mode if it cannot establish an error-
corrected link.
Test Restoral
Determines how often the modem checks for loop
current on the dial line, to determine whether the line is
available.
=Never
=Daily
=Weekly
=Monthly
Call Time-Out
Determines how long the modem waits from the time it
completes dialing to the time it detects answer-back tone
from the remote modem. If the modem does not receive
answer-back tone from the remote modem within the
specified time, the modem disconnects.
=Time-out After 30 secs.
=Time-out After 60 secs.
=Time-out After 90 secs.
=Time-Out After Interval Stored in S-Register 7