Feeder Unit - Canon iPF605 Service Manual

Chapter 4

4.3.8 Feeder Unit

a) Removing the pinch roller
1) Remove the rear cover.
2) When removing the pinch roller, press down the pinch roller unit[1] in the direction of the arrow.
3) Remove the pinch roller[1].
b) Removing the spur unit
1) When removing the spur unit, first open the top cover, and then remove the left and right circle covers, tank cover, right upper cover, operation panel, lower rear
cover, right cover, right front cover, upper front cover, lower front cover, cover guide, upper rear cover, and left and right cover mounting plates. Refer to DISAS-
SEMBLY/REASSEMBLY > Points to Note on Disassembly and Reassembly > External Covers.
2) Remove the three screws[1], and then remove the mist fan[2].
4-28
[1]
F-4-59
[1]
F-4-60
[1] [2]
[1]
F-4-61
0019-6264