The cap unit is used to cap the print head nozzles during capping and cleaning. The portion that touches the face plate is made from rubber. Two caps are arranged

for the printhead (six arrays of nozzles) installed in the carriage.

During cleaning, the caps used for both suction and capping are used to suck ink from the printhead using the suction pump.

During capping, the caps are raised by the cap cams operated by the purge motor to cover the arrays when the carriage has moved to the home position, thus pro-

tecting the nozzles.

2-24

Carriage lockpin

Cap

Glycerin tank

Purge motor

Pump encoder sensor

Purge unit

F-2-15

Pump cam sensor

F-2-16

0013-4307