Canon iPF605 Service Manual page 118

Chapter 3
(6) Lift the Belt Stopper [2] of the Carriage Shaft [1] and pull it forward to remove it.
MEMO:
- You will need the Belt Stopper if you move the printer to another location. Do not discard the Belt Stopper you have removed.
- When you open the Top Cover, you will find a Cleaning Brush [3] on the right side. Use this brush to clean inside the Top Cover.
(7) Plug the power cord into the Power Socket on the back of the printer.
(8) Plug the power cord into the outlet.
(9) Set the printhead.
Press the Power botton to power on the printer.
(10) When Open Top Cover is displayed on the Display Screen, open the Top Cover.
3-4
[2]
[1]
[3]
F-3-9
F-3-10
F-3-11
K
F-3-12
F-3-13