Download  Print this page

Advertisement

Chapter 3
(24) Close the Ink Tank Lock Lever until it clicks. Make sure the Ink Lamp is lit in red.
(25) Repeat steps 20-24 to install all Ink Tanks.
(26) Close the Ink Tank Cover.
(27) After all Printheads and Ink Tanks are installed, Keep Cover Closed is shown on the Display Screen. The system now automatically fills with ink. This process
takes about 8 minutes.
MEMO:
- Initial ink filling performed at printer installation consumes ink beween the ink tanks and printhead.
- The ink level indicators may drop to 80% immediately, but this does not indicate a problem with the printer.
3-8
F-3-29
F-3-30

Advertisement

Table of Contents

Troubleshooting

Comments to this Manuals

Symbols: 0
Latest comments: