Canon iPF605 Service Manual page 148

Chapter 4
Note on attaching the right cover
Be careful in attaching the right cover not to press the ink tubes with the edges of the cover.
o) Right front cover
Removing the right front cover
1) When removing the right front cover[2], open the top cover, and then remove the roll feed unit, output guide, right circle cover, operation panel, exhaust filter,
right cover, and lower rear cover.
2) Remove the two screws[1], and then remove the right front cover[2].
p) Rear cover
Removing the rear cover
1) When removing the rear cover[2], open the top cover, and then remove the roll feed unit, left circle cover, tank cover, left circle cover, right upper cover, operation
panel, exhaust filter, right cover, lower rear cover, left cover, and left rear cover.
2) Remove the three screws[1], and then remove the rear cover[2].
4-10
F-4-21
[1]
[2]
F-4-22
[1]
F-4-23
[1]
[2]