Paper; Paper Cover - Canon selphy cp1200 User Manual

Hide thumbs Also See for selphy cp1200:
Table of Contents

Advertisement

No date or file number when printing from memory cards or USB flash
drives
Confirm that SELPHY is set up to print the date or file number
Note that in DPOF printing, date or file number printing is configured on the camera.
No date or file number when printing from cameras
Confirm that the date or file number setting is enabled on the camera. Note that under
standard camera settings, the date or file number setting on SELPHY will be used.
Print quality is poor
Confirm that the ink sheet and paper are free of dirt or dust.
Confirm that SELPHY's interior is free of dust
Confirm that no condensation has formed on SELPHY
Confirm that SELPHY is away from sources of electromagnetic waves or strong
magnetic fields
(=
11).
Printed colors do not match on-screen colors
Screens have a different method of color development from printers.
Colors may also look different depending on the intensity and color temperature of
lighting in the monitor viewing environment, as well as monitor color calibration.
Individual images are printed reduced, in only one layout position
Change the [Page Layout] settings
(=
than [1-up] is selected, individual images are printed in one layout position per sheet
if you print from a camera or other device that can only send one image at a time.
Printing takes too long
SELPHY will temporarily halt printing if it exceeds a specific temperature; this does
not indicate a problem. Wait until the printer cools off. During continuous printing, in
hot environments, or if the printer's interior becomes hot because the rear-side air
vent
(=
5) is blocked, SELPHY may temporarily stop printing, causing printing to
take longer.
Printing may take some time depending on the printing environment. In this case, try
another printing method (printing from a memory card, printing via Wi-Fi, printing via
USB cable).
(=
30).
(=
63).
(=
63).
26). When a layout in [Page Layout] other

Paper

Paper does not fit in the cassette
Confirm that the paper is the same size as the paper cassette
Paper feed problems or frequent paper jams occur
Confirm that the paper and cassette are inserted correctly
Confirm that there are less than 19 sheets in the cassette.
Confirm that 19 or more prints have not collected on the paper cassette.
Confirm that you are using paper designed especially for SELPHY
Cannot print the correct quantity (unused paper left after ink runs out)
Some unused paper may remain if the ink runs out first
Paper jams
If paper protrudes from the front or back paper ejection slot
out. If you cannot remove the paper by gently pulling it out, never force it out. Turn the
printer off and then on. Repeat until the paper is ejected. If you accidentally turn the
printer off while printing, restart it and wait until the paper is ejected. If paper jams and
cannot be removed, contact your retailer or a Canon Customer Support Help Desk.
Do not attempt to remove jammed paper by force, which may damage the printer.
Cover
(=
2).
Contents
(=
9, 10).
Part Names
(=
10).
Basic Operations
(=
15).
Print Settings
(=
5), carefully pull it
Printing via Wi-Fi
Printing via USB
Cable
Troubleshooting
Appendix
57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents