Canon selphy cp1200 User Manual page 28

• When [Bordered] is selected in [Borders]
selected in [Center].
•
When printing an image that has a 4:3 or more elongated aspect
ratio, the printed image layout is the same even if [Off] is selected
for [Center].
• Marks are printed in the four corners of each printed image as a guide for
cutting out the photo.
Optimal Prints with Auto Correction (Image
Optimize)
z z Automatically corrects the brightness and contrast according to the
image.
z z
On (default) / Off
• Some images may not be adjusted correctly.
• Turning off SELPHY will restore the default setting of [
• When [ Index] is selected in [Page Layout]
not applied.
• The degree of correction may vary depending on layout and paper size.
(= 26), [Off] can be
z
z
z
On].
(= 26), [Image Optimize] is
Adjusting the Brightness
z Adjust image brightness in a range of –3 to +3.
z
Choose larger positive values to make images brighter, or larger negative
values to make them darker.
• Turning off SELPHY will restore the default setting of [±0].
Adjusting the Color Tone (Color Adjustment)
z Adjust the color tone by adjusting the RBCY colors in a range of 0 to 3.
z z On the screen in step 2 of "Configuring
Settings"
buttons to select [Color Adjustment], and
then press the <o> button.
z z Press the <u><d><l><r> buttons
to select the values, and then press the
<o> button to confirm your choice.
• Turning off SELPHY will restore the default setting of [
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via Wi-Fi
(= 25), press the <u><d> Printing via USB
Cable
Troubleshooting
Appendix
0,0].
28