Canon selphy cp1200 User Manual page 11

Installing and Plugging in SELPHY
1
Choose the right place to put
More than
SELPHY.
length of
paper
z
z
Minimum
10 cm
(4 in.)
z
Minimum
z
10 cm (4 in.)
2
Plug the adapter cord into
SELPHY.
z z
Insert the adapter plug fully into the
power inlet on SELPHY.
3
Connect the power cord.
z z Connect the power cord to the compact
power adapter, and then plug the other
end into a power outlet.
z Place the printer on a table or other
flat, stable surface. Never place the
printer on an unstable or tilted surface.
z Keep the printer away from sources
of electromagnetism or strong
magnetism.
z Leave at least 10 cm (4 in.) of open
space around the printer.
z Leave more open space behind the
printer than the length of paper used,
so that the paper can pass in and out
of the printer freely when printing.
• Do not use the printer near motors or other devices that generate
strong magnetic fields, or in dusty environments. This may damage
the printer or cause malfunction.
• Do not place the printer near televisions or radios. This may cause
the printer to malfunction.
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via Wi-Fi
Printing via USB
Cable
Troubleshooting
Appendix
11