Handling And Maintenance - Canon selphy cp1200 User Manual

Compact Power Adapter CA-CP200 B
Rated Input 100 – 240 V AC (50/60 Hz), 1.0 A (100 V) – 0.6 A (240 V)
Rated Output 24 V DC, 1.8 A
0 – 40°C (32 – 104 °F)
Operating Temperature
Battery Pack NB-CP2LH (Sold Separately)
Type Rechargeable lithium-ion battery
Nominal Voltage 22.2 V DC
Nominal Capacity 1290 mAh
Charging Cycles Approx. 300 times
Operating Temperature 5 – 40 °C (41 – 104 °F)
Battery Pack NB-CP2L (Sold Separately)
Type Rechargeable lithium-ion battery
Nominal Voltage 22.2 V DC
Nominal Capacity 1200 mAh
Charging Cycles Approx. 300 times
Operating Temperature 5 – 40 °C (41 – 104 °F)
• All data is based on tests by Canon.
• Printer specifications or appearance are subject to change without notice.
USA and Canada only:
As a participant in the international Energy Star Program, we
believe this product satisfies the standards of the Energy Star
Program.

Handling and Maintenance

•
Do not subject the printer to excessive force, which may damage the
printer or cause paper jams.
• Do not expose the printer to insecticides or other volatile substances.
Additionally, do not store the printer in contact with rubber, vinyl, or plastic
products over extended periods, which may deteriorate the casing.
• Avoid condensation on the printer, which may happen when moving
the printer from cold to warm environments. Put the printer in a sealed
plastic bag and allow it to adjust to the new temperature before removing
the bag. If condensation forms, allow the printer to dry naturally at room
temperature before using again.
• When the printer becomes dirty, wipe it with a soft, dry cloth.
• If the air vent (= 5) becomes dusty, remove the ink cassette
(= 15) before wiping the dust away, to prevent dust from getting inside
and affecting print quality.
• Never wipe the printer with solvents, such as benzene or thinner, or
neutral detergent, which may cause deformation or peeling of the
casing.
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via Wi-Fi
Printing via USB
Cable
Troubleshooting
Appendix
63