Canon selphy cp1200 User Manual page 37

If Printing via AirPrint is Not Possible
If you cannot print, check the following.
• Confirm that SELPHY is on. If SELPHY is on, try restarting it to see if the
problem is resolved.
• Confirm that SELPHY is connected via Wi-Fi to the same access point as
the Apple device.
• Confirm that the paper and ink cassettes are loaded correctly.
• Remove any inserted memory cards, USB flash drives, or USB cables.
• Confirm that no error messages are displayed on SELPHY.
•
Try resetting the Wi-Fi settings (=
If the issue persists, try another method of printing
to make sure SELPHY can print correctly. If printing is still not possible, see
"Troubleshooting" (= 55).
• It may take a few minutes after you turn on SELPHY before Wi-Fi
communication is possible. Confirm that SELPHY is connected to the access
point (= 45) before you attempt to print.
49) and connecting again.
(= 34, 37, 39)
Printing from a Camera
You can print as follows by connecting the printer to a camera compatible
with DPS over IP, the PictBridge standard for Wi-Fi connections.
1
Prepare SELPHY.
z z Remove any inserted memory cards or
USB flash drives.
z z Insert a loaded paper cassette and an
ink cassette in SELPHY. Refer to "Initial
Preparations"
2
Access the setting screen.
z z Press the <k> button.
z z Press the <u><d> buttons to select
[Wi-Fi Settings], and then press the
<o> button.
z z
Press the <u><d> buttons to select
[Connection Settings], and then press the
<o> button.
Cover
Contents
Part Names
(= 8) for details.
Basic Operations
Print Settings
Printing via Wi-Fi
Printing via USB
Cable
Troubleshooting
Appendix
37