Canon selphy cp1200 User Manual page 52

5
Prepare SELPHY.
z z
Remove any inserted memory cards or
USB flash drives.
z z Insert a loaded paper cassette and an ink
cassette in SELPHY (= 8 - 10).
z z If the printer and computer are not
connected yet, turn off the printer
momentarily, connect it to the computer
via USB (= 51), and then turn on the
printer again.
6
Access the printing dialog box.
z z Start the photo software, select images to
print, and access the printing dialog box.
z z As the destination printer, select "Canon
SELPHY CP1200".
7
Choose printing options.
z z
Choose a paper size corresponding
to the size of paper and ink cassettes
in SELPHY. Also choose bordered or
borderless printing as an option with the
listed paper sizes.
z z Choose the printing orientation and
number of copies, as desired.
8
Print.
• Printing in progress cannot be canceled from SELPHY by using the
<v> button. To cancel printing, use the computer to delete the print
job.
• The printer may not work correctly if it is connected to a computer
via a USB hub.
•
Avoid allowing your computer to enter sleep or standby mode while
SELPHY is connected via USB. If the computer enters sleep mode
with SELPHY connected via USB, wake the computer without
disconnecting the USB cable. If recovery fails, restart the computer.
• For computer or photo software instructions, refer to the relevant
user manual.
• If an error message is displayed on SELPHY, also check for any error
messages displayed on the computer (in desktop mode). Messages will be
automatically dismissed once you resolve the issue indicated.
• If a message is displayed on the computer, you can also click [Cancel] to
cancel printing.
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via Wi-Fi
Printing via USB
Cable
Troubleshooting
Appendix
52