Printing Id Photos - Canon selphy cp1200 User Manual

Printing ID Photos

Images can be printed for use in photo identification. Choose from the
following three sizes.
Specify the length of the long and short sides, and then
[Custom]
print.
Print a photo that complies with the international ICAO
[Standard]
standard.
Print two sizes: 50x50 mm (approx. 2.0x2.0 in.) and
[Dual]
45x35 mm (approx. 1.8x1.4 in.).
z z With [Custom] and [Standard], two different images can be printed on
each sheet.
z z The photo may not be accepted as an official ID photo, depending on
the intended purpose. For details, contact the institution that requires the
photo.
1
Specify ID photo printing.
z z Press the <k> button.
z z Press the <u><d> buttons to select [ID
Photo], and then press the <o> button.
2
Specify the finished size of the
photo.
z z Press the <l><r> buttons to specify
how the size is determined.
z z [Custom]: Press the <u><d> buttons
to select [Long Side], and then press the
<l><r> buttons to specify the length.
Specify the [Short Side] length, and then
press the <o> button again. Note
that options available for [Short Side]
are automatically updated based on the
[Long Side] length.
z z [Standard] or [Dual]: Check the indicated
image size and press the <o> button.
3
Choose an image to print.
z z Press the <l><r> buttons to select an
image, and then press the <u> button.
is shown in the lower right (up to two
images with [Custom] and [Standard],
only one image with [Dual]).
z z To specify the cropping area (=
press the EDIT button.
z z Print as described in step 6 of "Printing
Images (Select & Print)" (= 14).
z z Settings are cleared after printing.
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via Wi-Fi
Printing via USB
Cable
20),
Troubleshooting
Appendix
21