Read Defect Data Command: Defect Data Configuration - Fujitsu MAA3182FC Series Manual

The "Transfer byte length" field in the CDB specifies the defect data length (number of bytes)
that can be received by the INIT. The IDD terminates data transfer when transfer of the length
of defect data specified in the "Transfer byte length" field is completed or when transfer of all
the defect data of the specified type is completed. Also, when zero is specified in the
"Transfer byte length" field, this command is terminated without execution of data transfer.
Figure 4.23 shows the format of defect data transferred to the INIT by this command.
Byte
0
1
Header
2
3
4
Defect
~
~
Descriptor
List
n
Figure 4.23 READ DEFECT DATA command: defect data configuration
4 - 108
Bit
7 6
0 0
~
~
C141-E054-02EN
5 4 3
X'00'
0 PList GList Defect List Format
Defect List Length (MSB)
Defect List Length (LSB)
Defect Data
2 1 0
~
~