Table of Contents
Advertisement
Glossary
The glossary explains technical terms which are necessary to the reader's understanding when
reading this manual.
List of Abbreviations
This list shows the full spelling of abbreviations used in this manual.
The model name of disk drives covered by this manual differs in its ending suffix (Note 1)
depending on its device type (three types), the electrical conditions of the Fibre channel
interface used to connect the disk drive to the host system and its capacity and data format at
the time it was shipped, but in this manual, except in cases where models need to be especially
distinguished, a representative model name (Note 2) is used. In addition, these disk drives are
called Intelligent Disk Drive (IDD), "drive" or "device" in this manual.
Note 1:
Model Name
M AF 3 364 FC
Interface type
Formatted capacity (100 MB units)
Disk size 3: 3.5 inch
Type
Warning Indications
The following warning indications are shown in this manual to prevent the user and other
nearby persons or property from being injured or damaged.
IMPORTANT
In the text, the alert signal is centered, followed below by the indented message. A wider line
space precedes and follows the alert message to show where the alert message begins and
ends. The following is an example:
(Example)
Before moving the drive, remove the optical disk cartridge to avoid
head or disk damage
vi
FC: Fibre Channel
AA: 1.6 inch height, 7,200 rpm
AF: 1.6 inch height, 10,000 rpm
AG: 1 inch height, 10,000 rpm
This indicates information that could help the user use the product more
efficiently.
IMPORTAMT
C141-E054-02EN
Advertisement
Table of Contents
