Table of Contents
Advertisement
1 - 44
•
The drive responds with the value
specified by PRLI.
(6) Response Code [PL:W01/B2/bit3-0]
1h: Request executed.
•
The drive responds with 1h by ACC when
PRLI is executed.
(7) Originator Process Associator [PL:W02]
0000h: The drive does not support this field and
responds with 0000h by ACC.
(8) Responder Process Associator [PL:W03]
0000h: The drive does not support this field and
responds with 0000h by ACC.
(9) Service Parameters [PL:W04]
a) 0b: Data Overlay Allow [B3/bit6]
•
The drive does not support this field
and responds with 0b by ACC.
b) 0b: Initiator Function [B3/bit5]
•
The drive responds with 0b by ACC.
c) 1b: Target Function [B3/bit4]
•
The drive responds with 1b by ACC.
d) 0b: Command/Data Mix Allowed [B3/bit3]
•
The drive does not support this bit and
responds with 0b by ACC.
e) 0b: Data/Response Mix Allowed [B3/bit2]
•
The drive does not support this bit and
responds with 0b by ACC.
f) 1b: Read Transfer Ready Disable [B3/bit1]
•
The drive responds with 1b by ACC.
g) 0b: Write Transfer Ready Disable [B3/bit0]
•
The drive responds with 0b by ACC.
C141-E054-02EN
Advertisement
Table of Contents
