1/10Gbase-T Autosensing Ethernet Port Leds; Fan Tray Alarm Leds - HP HPE FlexFabric 5930 Installation Manual

Table 26 Management Ethernet port LED description for the HPE 5930-32 QSFP+/HPE
5930-32 QSFP+ TAA/HPE 5930-4Slot/HPE 5930-4Slot TAA switches
LED mark
LINK
ACT
The HPE 5930-2Slot+2QSFP+/HPE 5930-2Slot+2QSFP+ TAA switch provides a LINK/ACT LED for
the management Ethernet port.
Table 27 Management Ethernet port LED description for the HPE 5930-2Slot+2QSFP+/HPE
5930-2Slot+2QSFP+ TAA switch
LED mark
MGMT
LINK/ACT

1/10GBase-T autosensing Ethernet port LEDs

Table 28 1/10GBase-T autosensing Ethernet port LED description
Status
Steady green
Flashing green
Steady yellow
Flashing yellow
Off

Fan tray alarm LEDs

The LSWM1BFANSC and LSWM1BFANSCB fan trays provide an Alarm LED.
Table 29 LSWM1BFANSC and LSWM1BFANSCB fan tray alarm LED description
Status
On
Off
Status Description
Off The management Ethernet port is not connected.
Steady green The management Ethernet port is operating at 10/100/1000 Mbps.
Off The management Ethernet port is not receiving or sending data.
Flashing yellow The management Ethernet port is sending or receiving data.
Status Description
Steady green The management Ethernet port is operating at 10/100/1000 Mbps.
Flashing green The management Ethernet port is receiving or sending data.
Off The management Ethernet port is not connected.
Description
The port has a link and is operating at 10 Gbps.
The port is sending or receiving data at 10 Gbps.
The port has a link and is operating at 1 Gbps.
The port is sending or receiving data at 1 Gbps.
No link is present on the port.
Description
The fan tray is faulty.
The fan tray is operating correctly.
61